Industrial Networking
FiberINTERFACES
Digital
Field Bus
Video
Composite Video Transmitters/Receivers
RGB Video Transmitters/Receivers - High-Resolution
Hybrids modules and OptoQuick components
Accessories
Industrial Ethernet
Hirschmann Networks
         
OEV 052-E BFOC-1300
Product description
Description Composite video receiver 7 MHz; can be combined with the transmitter OSVC 01 BFOC-1300
Port type and quantity 1 x optical: BFOC 2.5 (STR) socket 1 x electrical: BNC socket
Type OEV 052-E BFOC-1300
Order No. 933 994-021
Electrical interface
Signal type composite
Output voltage 1 Vpp at 75 Ohm
Output resistance 75 Ohm
Pulse tilt (horiz. and vert.) typ. 2%
Differential phase typ. 2.5°
Upper limiting frequency (-3 dB) 7 MHz
Optical interface
Wavelength 1300 nm
Optical input power >= 0.8 µWpp, -31 dBm with S/N > 45 dBw
Laser protection class 1 according to DIN EN 60825
More Interfaces
Power supply plug connector according to DIN EN 60603-2; pin 1: ground, pin 32: +VS
Network size - length of cable
Single mode fiber (SM) 9/125 µm 10000 m 7 dB link budget, A = 0.5 dB/km, 2 dB reserve with OSVC 01 BFOC-1300 (26000 m/15 dB at +25 °C)
Power requirements
Operating voltage 17.6 ... 24 V
Current consumption 120 mA
Power consumption 2.9 W
Ambient conditions
Operating temperature -20 °C to +50 °C
Storage/transport temperature -20 °C to +80 °C
Relative humidity (non-condensing) 10% to 90%
Mechanical construction
Mounting 19" plug-in card
Dimensions (W x H x D) 30 (6 PU) x 128.5 (3 HU) x 185 mm
Weight 450 g
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD) contact discharge: 4 kV, air discharge: 8 kV
EN 61000-4-3 electromagnetic field 10 V/m (80 - 1000 MHz)
EN 61000-4-4 fast transients (burst) power line: 2 kV, data line: 1 kV
EN 61000-4-5 surge voltage power line: 1 kV (line/line)
EMC emitted immunity
EN 55022 EN 55022 limit class B
Scope of delivery and accessories
Scope of delivery plug-in receiver card, operating instructions
Accessories to order separately 19" subrack ART 84
Notes
Picture signal To ensure correct operation, the controller requires a degree of whiteness of 0.5% in the picture signal.